In the wet screen application, three TSX vibrating screens are used to remove oversized silicon sand particles. Sand and water are transported from the water separator to the screen surface. All sand greater than 40 grains is cut off and removed from the stream.

Add the minus 40 particles to the water and send them to the dewatering screen and dryer. The screen processes 1200 – 1500 gallons of traffic per minute. Stretch three panels of polyurethane wet screen to grind silicon sand into vibrating screen frame.

The blast bar located above the screen surface allows solids to be crushed again to efficiently remove oversized sand particles. The industrial vibration motor is designed to fit the full width of the display frame to apply maximum vibrating force to the display panel.

It is a small and medium advanced multi-layer screening machine. the component in contact with the stainless steel material.

The material is separated by vibrating “sieve or mesh”, which has a variety of different sizes depending on customer requirements. The final product is available to the building and construction industries. It has the characteristics of advanced structure, strong vibration force, low vibration noise, convenient maintenance and high durability.

Circular Motion vibrating screen is specially designed for quarry to separate gravel material into different sizes and can also be used as a classifier in coal preparation, concentration, building materials, electricity and chemical industries.

The electric motor drives the belt wheel through the eccentric shaft so that the movable jaw moves back and forth and up and down. When the movable jaw moves to the fixed jaw together with the movable jaw, the raw material is squeezed or cracked.