TSX wet sand screen vibrating screen is mainly aimed at the graded dehydration and slime recovery of coal and non-coal materials with relatively fine or tiny particles.

TSX wet sand screen vibrating screen is specially designed for slime dehydration before plate and frame filter press system.

TSX has optimized and upgraded the design of the wet sand screen vibrating screen, especially the vibrators. There are two vibrators installed on the vibrating beam, which directly provide the vibrating force for the wet sand screen vibrating screen.

TSX wet sand screen vibrating screen can smoothly transmit power and excitation force of linear trajectory during transportation. Thus, the material can dehydrate the material through the vibrating screen.

The vibrating motors with the same parameters are installed on the exciter beam run in the opposite direction at the same time.

The component of forces which is perpendicular to vibrating direction have been killed and The component of forces which is parallel to vibrating direction have been added up together to be linear vibrating force, the screen can vibrated on the springs by the vibrating force, meantime, the springs can reduce the dynamic load of screen.

Screen mesh and slot panelare synchronous vibration to make the materials moving forward and dewatering on the screen surface.

The materials were feed up continuously from the feed end groove, dewatered by the screen surface, the materials below the screen surface were send to the groove of below screen surface , the materials above the screen surface were send to the groove of discharge end.

Choosing the higher intensity of projection and the best screen surface system according to different feeding materials. 45°screen surface of feed section is convenient for draining, -5°screen deck of discharge end is convenient for dewatering. Obviously, all of these can improve the handing ability  and dewatering efficiency of the screen.