Regarding the TSX coal machine vibrating screen, there are many types: single-layer horizontal screen, double-layer horizontal screen, single-layer banana screen, double-layer horizontal flip screen (one layer of static screen + one layer of flip screen), three-layer banana flip-trigger Trigger screen (one static panel + two trigger panels), high frequency screen, etc.]
Operating Principle of TSX coal machine vibrating screen：Taking ABS3661 single banana screen for example.
- Motor rotate and then the belt transmission is adjusted speed.
- Transfer exciting force to drive shaft by layshaft assembly.
- Provide exciting force by the exciter running. The angle is 45° between direction of exciting force and horizontal plane.
- The linear vibrating force acts on the screen to vibrate by springs. The dynamic load of screen base support can be reduced by the springs.
- Transfer vibrating force to materiel by screen and slot panel are synchronous vibration. The materiel moving forward, lamination and classification according to granularity.
- The materiel were feed up and classified continuously from the feed end to discharge end by slot panel, the materials below the screen surface were send to the groove of below deck, the materials above the screen surface were send to the groove of discharge end
This screen uses5 angles and 5 segments fold line screen deck, the screendeck angle of inclination from feed end to discharge end are 25°, 20°, 15°, 10°, 5°. In the effect of exciting force, materials form into the fluid coal when the continuous move forward on the screen surface to the discharge end. The bigger inclination of the screen surface the faster speed of materials.
This is Operating Principle of TSX coal machine vibrating screen ABS3661 single banana screen
