We know that the vibrating force of the vibrating screen is generally generated by the rotation of the motor, and the rotation direction of the vibrating screen is the rotation direction of the vibrating motor.

When the vibrating motor of the TSX horizontal vibrating screen works normally, the running direction of the two motors is opposite, which must be kept in mind. Only in this way can linear motion be generated, and the materials will be pushed forward in a linear motion mode. If the running direction of the vibration motor is the same, how to adjust it to operate normally? If the wire sequence of 3 live wires in one motor is arbitrarily changed to 2, it is OK.

For the problem of rotation of vibration motor, the rotation of vibration motor refers to that on a vibrating screen, if two motors are used, the direction of these two vibration motors should be opposite. If two motors are opposite, the number of materials handled is relatively small, but the amplitude is relatively large, and the vibration frequency is relatively high.

If two motors are in the same direction, the number of materials handled is relatively large the amplitude is relatively small, and the vibration frequency is relatively low. The rotation direction of the vibration motor can be adjusted according to the specific production requirements.

For the selection of the TSX vibrating screen motor, the corresponding vibrating motor model should be selected according to different vibrating equipment models. If the selection of vibrating motor is too small, it will not achieve a large, exciting force and the corresponding screening effect. If the selection of vibrating motor is too large, it will cause damage to the TSX vibrating screen equipment.

Therefore, to better use the vibrating screen, no matter the rotation direction of the motor or other accessories, they need to be well adjusted to ensure production efficiency.